The rugged bullbar mounted Trucker Edge antenna has an extra-heavy-duty stainless-steel bell-spring for rough corrugations and a strong weatherproof, tapered fibreglass radome that provides consistent radiative performance in all directions. 

Features:

-5G Ready
-Optimum 6dB gain for flat and hilly areas
-698 to 2200 MHz, SMA Male
-Extra heavy-duty stainless steel spring
-High-vibration PTL-240 Ultra-Flex cabling
-4.5 metres of cable with an industry-standard SMA Male connector

Further Information:

Blackhawk Trucker Edge Specifications

• 5G Ready
• 4 dBi gain across lower bands 698-960 MHz
• 5 dBi gain across upper bands 1710-2170 MHz
• Can be mounted directly on a bullbar
  
• Supplied with 4 m of PT240 LSHF ultra-flex cable with a pre-fitted SMA male connector

Further Information:

Trucker Edge Compact Lite antenna

Trucker Mini Antenna, 698 to 2700 MHz, SMA Male

This antenna has the flexibility to be roof mounted, gutter or mirror mounted. At 40cm length, the antenna will sit below the roofline of most vehicles meaning no more worries about underground car parks or other low clearance areas.

• 3 dBi gain across lower bands 698-960 MHz
• 5 dBi gain across upper bands 1710-2700 MHz
• 5G ready
• Ruggedised construction for Australian conditions
• Flexible enough to be roof, gutter or mirror mounted
• Supplied with 4m of PT240 LSHF ultraflex cable with a pre-fitted SMA male connector
• Ideal antenna for the Cel-Fi GO vehicle repeater

Downloads / Further Information:

Blackhawk Trucker Mini Antenna Specifications

698 to 2700 MHz, SMA Male

With its low profile, the Pulse Larsen magnetic mount antenna provides a smaller option without sacrificing performance.  The antenna is rugged and weatherproof (IP67). 

Features:

-5G Ready
-4.5dB gain for 698-960 MHz
-5.6dB gain for 1710-2400 MHz
-4dB gain for 2500-2700 MHz

Please note that the antenna base requires to be placed on a metal ground plane.

Product Information:

Pulse Larsen Magnetic mount antenna

With its compact design, this small adhesive antenna boosts signal where mounting access is a problem 

FEATURES: 

• 3 dBi gain across lower bands 698-960 MHz
• 3 dBi gain across upper bands 1710-2700 MHz
• Mounting by 3M adhesive sticker (17 x 6 x 2cm)
• Connector Type SMA Male
• Cable length 3 metres

698 to 960 MHz, N Female + 10m Cable N Male to SMA Male

Really pulls in weak signals.  Ideal for long-range signal enhancement in the 700 to 900MHz range. Boost your 4G connectivity with this high-performance antenna.

Ideal in Rural and remote locations. This antennais compatible with the Telstra 4GX (700 MHz)

FEATURES

• 14 dBi gain across low band 698-960 MHz
• Ruggedised construction for Australian conditions
• Fully welded black powdercoat design
• Galvanised universal mounting clamp included
• Supplied with 10m PT240 Low loss cable
• Downloads / Further Information:

Blackhawk Yagi Specifications

The LPDA antenna covers all cellular bands between the 700 and 4000 MHz range with a high peak gain which projects maximum energy in the direction of the cell tower, while maintaining a wide enough beam to capture signal reflections off nearby buildings, hills, and signals scattered by trees.

Ideal for Telstra and Optus 4G & 5G

FEATURES

• 11.3 dBi gain across lower bands 698-960 MHz
• 11.5 dBi gain across upper bands 1695 to 2700 MHz
• 9.5 dBi gain across upper bands 3300 to 4000 MHz
• Ruggedised construction for Australian conditions
• Fully welded, powdercoat aluminium design
• Stainless steel mounting clamp included
• with 30 cm tail with pre-terminated N Female connector and 
  supplied with 10 m of flexible PT240 LSHF cable
• Ideal for high speed 3G and 4G LTE applications.

Operating on all 3G and 4G frequencies in Australia and abroad, this high grade antenna can be used in a range of residential, commercial, and industrial mobile broadband applications on any mobile network. This is the ideal external antenna for Cel-Fi repeater systems.

A Log Periodic Dipole Antenna, or LPDA for short, is a clever antenna design that provides exceptionally wideband performance by phasing a series of elements together, much like an ordinary yagi but with each successive element of a smaller (or larger) length. The result of this clever engineering is an antenna that holds high gain, with good tuning, across the entire cellular frequency range.

Further Information:

LPDA antenna

4G-5G Wideband/ Mini LPDA Antenna, 698 to 4000 MHz, N Female, PTL-240 Coaxial Cable N Male to SMA Male, 10m

Fantastic little antenna providing good performance with a lightweight, low cost design. There's plenty of situations where a big, solid metal antenna is necessary, but also plenty where something quick and small can be just as useful. This antenna is great for areas where indoor signal is weak, and only a simple antenna on the roof is enough to give a fantastic improvement.

The antenna is simple and effective, it might not last as long as a fully welded LPDA antenna but it's a great antenna for temporary installations or those travelling who need something compact.

Features:

• 698 to 4000 MHz Frequency Range
• 9dBi Gain
• Log Periodic Dipole Array (LPDA) design
• Supports 4G and 5G
• UV-stable ABS radome construction
• N Female connector
• 300 mm RG-142 cable tail
• 50W max. Input Power
• Supplied with 10m cable
• Pole/post not included

Further Information:

Wideband/ Mini LPDA antenna

Designed for versatility, for use in a variety of environments, in low to high signal areas and mounted in a marine environment. This antenna is also suitable for caravanning.

With a high 7 - 10 dBi gain and supporting all bands, this antenna will provide the perfect solution for voice and data applications where high gain marine antennas are required.

The antenna does not require a level mounting surface and is supplied with a nylon/resin deck mount 

This antenna offers superior performance, maximum range and reliability - it is perfect for fixed wireless terminals, mobile broadband internet applications and smart repeater applications to improve mobile signal coverage.

FEATURES:

• 7 dBi gain across all mobile frequencies 698 to 960 MHz and 1710 to 2700 MHz
• up to 10 dBi gain across upper bands 1710-2700 MHz
• White fibreglass construction
  
• Short cable tail with a pre-fitted N Female connector
• Ideal for long range boating
  

Cable sold separately HERE  

Downloads / Further Information:

Blackhawk Marine Antenna 

4G Omni High Gain Antenna, 698 to 2700 MHz, N Female, PTL-240 Coaxial Cable N Male to SMA Male, 10m

This antenna offers offers wide frequency coverage and durability.

Features:

• 5 dBi gain across lower bands 698-960 MHz
• 6 dBi gain across upper bands 1695-2700 MHz
• Ruggedised construction for Australian conditions
• UV-stable PVC construction
• Stainless steel L-bracket included
• Integrated N Female connector
• 10m flexible PT240 LSHF cable pre-fitted with an SMA male connector.

Further Information:

Omni High Gain antenna

Indoor dome antennas are designed to be mounted to the ceiling of your building to provide consistently distributed mobile phone service from your Cel-Fi repeater/booster. The antenna is compact with a visually unobtrusive design similar to a smoke alarm.

Perfect for repeater applications that require a 360° beamwidth for complete internal coverage.

Cable not included. Cable lengths sold separately HERE

Features:

• 2 dBi gain across lower bands 698-960 MHz
• 5 dBi gain across upper bands 1695 to 4000 MHz
• Short cable tail with N female connector

Further Information:

Blackhawk Ceiling Mount 

 698 to 4000 MHz, N Female

The indoor Wall Mount panel antenna is a "semi-directional" antenna. The antenna aims to provide 5 to7 dBi, with coverage transmitted in a wide arc (between 60 and 90 degrees)

FEATURES:

• Provides a 5 dBi gain for 698 to 960 MHz
• Provides a 7 dBi gain for 1710 to 4000 MHz
• Short cable tail with N female connector

Cable not included. Cable lengths sold separately HERE

Further Information:

Blackhawk Wall Mount 

This antenna can be easily used either for Indoor or Outdoor Applications. The antenna is aesthetic, small and has unobtrusive profile that blends easily with any environment.

Features:

• Covers 698-806 MHz, 806-960 MHz, 1710-2170 MHz, and 2200-2700 MHz
• 5 dBi to 6.5 dBi Gain 
• Linear, Vertical Polarisation
• 1.7:1 to 2:1 VSWR
• 10W max. Input Power
• UV-protected polycarbonate radome
• IP65 rated
• Wall mountable

Further Information

Mars Antenna 

Features: 

• Frequency covers 698-3800MHz
• High Isolation
• Suitable for indoor applications

Ideal for antennas with an N Female connection running to a Cel-Fi GO 

Cable is low loss PT240 (LMR240 equiv.) One end N Male, other end SMA

• Low Loss Coaxial Cable
• Supports frequencies up to 6 GHz
• Double-shielded outer conductor
• UV-stable polyethylene (PE) jacket
• Flexible and Easy to Install
• High Power Handling

 N Male to SMA Male low loss cable. Recommended for when you need long cable lengths.

Used to connect roof-mounted Blackhawk antennas that have an N Female interface down into a Cel-Fi or 4G modem or any other device with an SMA Female interface (please ensure the check the specifications of your device)

This cable will also connect your internal wall mount / ceiling mount to a Splitter (SMA/F) 

The SMA Male connector’s 8 mm diameter allows the cable assembly to be easily fed through roof penetrations. The cable is very durable, designed in Queensland with the harsh Australian environment in mind.

Features:

• Durable and UV-Stable Polyethylene (PE) jacket
• Low Smoke Zero Halogen (LSZH) flame retardant
• Suitable for most Sub-6 GHz wireless transmissions
• Industry-leading attenuation characteristics
• Factory-terminated N Male and SMA Male connectors

Power supply (2.5amps) suitable for G41 with Australian plug

Use this to power your GO Mobile unit or Roam R41.